What do you want to know?
Ask a questionNew questions in the section
-
Engineering +7 2021-09-09 16:03:01 QUESTION 27 020 The rotor of a steam turbine with mass 10.5 kg is mounted on steel shaft (E- 207 GPa). The shaft diameter is 49 mm and is 1.8 m long. The shaft is suppored at the two ends by the bearings The turbine rotor has an eccentricity of 9.0 mm and... Answer
-
Engineering +13 2021-09-09 15:42:02 HW11F19.pdf Download Q1 (10pts.): Extract an estimation of the transfer function that was used to create the Bode plot shown below IK- v(3) 20° 8dB 0d -8d 16d 24d -32dB -40d 48d -56dB -64d 72dB -80dB -20° -40° -60° -80° 100° 120 140° 160° ト·H 111翔 1-2 200... Answer
-
Engineering +16 2021-09-09 15:42:02 3. A two bar truss structure is shown in Figure 1. The coordinates of Points A, C and B are given by (0,0), (0, 10") and (10",0), respectively, in which the x-axis is from A to B and the y-axis is from A to C. Points A and C are fixed. The cross-s... Answer
-
Engineering +10 2021-09-09 15:38:01 what is the correct answer Task 3 Determine the strain when the rod is drag with force F 40 KN and Material's fy= 355 MPa and E = 210 GPa. The cross section area of the rod A, 250 mm2 1200 mm b, 4,51-10-4 c. 1022 μ a. 762 μ d, 204-10-6 d● 204-106 mm n... Answer
-
Engineering +15 2021-09-09 15:38:01 Please answer the question showing all the work step by step. Thank you 5 V 1. CMOS Inverter: Consider a CMOS inverter shown on the right. 2-1 For PMOS: ZIL-10, μ,-400 cm"V"s", Vr--1V; for NMOS: ZL=5, μ,-1000 cm2V'sı, VT-1 V, and the oxide... Answer
-
Engineering +18 2021-09-09 15:32:02 (25 pts) We have a tank of volume V which contains an ideal gas at constant temperature T and initial pressure Po. There is a small hole in the tank and gas leaks out at a velocity of (RT)5, We can use a molar density 1. Recall that mols in tanke ρν and m... Answer
Best helpers
Ranking is empty